HP StorageWorks 4400 - Replacing Array Components; Customer self repair (CSR); Best practices for replacing hardware components

9 Configuring application servers for
Windows using HP SmartStart EVA Storage
Overview
1. Insert the HP SmartStart EVA Storage CD in the drive of an application server. This may be the
same server as your management server.
The HP SmartStart EVA Storage tool runs automatically.
2. Click and choose to configure either for the first time or to use additional storage.
3. Repeat this configuration process for each server in your HP Command View EVA configuration.
Figure 21 Configure storage initially or add storage later
HP StorageWorks 4400 Enterprise Virtual Array installation guide 49