• Name—Host name used with Secure Manager. The name is defined when the host is created in
Secure Manager and can be modified.
• WWPN—World Wide Port Number. The WWPN is defined when the host is created in Secure
Manager. To modify the WWPN, remove and then recreate the host.
Drives
• Drive number—The drive number assigned by the library. Drives are numbered starting with one from
the bottom of the library up.
• LTO generation
◦ LTO6—Ultrium 6250
◦ LTO7—Ultrium 15000
◦ LTO8—Ultrium 30750
• Form factor
◦ HH—Half height
◦ FH—Full height
• Drive interface
◦ FC—Fibre Channel
◦ SAS—Serial Attached SCSI
• Serial#—The serial number assigned to the tape drive by the library.
• Partition—Library partition to which the drive is assigned.
• Available ports—Displays the available ports on the drive.
• WWPN_A, WWPN_B—The worldwide port name, a unique identifier for each FC interface. (FC only)
• Secure Mode—Indicates whether the drive is running in Secure Mode.
Partition Library LUN Device
• Name—The partition name assigned with one of the partition wizards.
• Serial#—The serial number of the drive port hosting the LUN, or SCSI communication interface, for
the partition.
Operating the library 119
To Next Page
Loading...
