HPE FlexFabric 5940 SERIES User Manual

52
• Local accounting does not provide statistics for charging. It only counts and controls the number
of concurrent users who use the same local user account. The threshold is configured by using
the access-limit command.
Configuration procedure
To configure accounting methods for an ISP domain:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter ISP domain view.
domain
isp-name N/A
3. Specify the default
accounting method for all
types of users.
accounting default
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name ]
[
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name ] [
local
]
[
none
] }
By default, the accounting
method is
local
.
The
none
keyword is not
supported in FIPS mode.
4. Specify the command
accounting method.
accounting command
hwtacacs-scheme
hwtacacs-scheme-name
By default, the default
accounting method is used
for command accounting.
5. Specify the accounting
method for LAN users.
accounting lan-access
{
broadcast
radius-scheme
radius-scheme-name1
radius-scheme
radius-scheme-name2
[
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
local
] [
none
] }
By default, the default
accounting method is used
for LAN users.
The
none
keyword is not
supported in FIPS mode.
6. Specify the accounting
method for login users.
accounting login
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name ]
[
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name ] [
local
]
[
none
] }
By default, the default
accounting method is used
for login users.
The
none
keyword is not
supported in FIPS mode.
7. Specify the accounting
method for portal users.
accounting portal
{
broadcast
radius-scheme
radius-scheme-name1
radius-scheme
radius-scheme-name2
[
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
local
] [
none
] }
By default, the default
accounting method is used
for portal users.
The
none
keyword is not
supported in FIPS mode.
8. Configure access control
for users who encounter
accounting-start failures.
accounting start-fail
{
offline
|
online
}
By default, the device
allows users who
encounter accounting-start
failures to stay online.
9. Configure access control
for users who have failed all
their accounting-update
attempts.
accounting update-fail
{ [
max-times
max-times ]
offline
|
online
}
By default, the device
allows users who have
failed all their
accounting-update
attempts to stay online.
10. Configure access control
for users who have used up
their data quotas.
accounting quota-out
{
offline
|
online
}
By default, the device logs
off users who have used up
their data quotas.
11. Specify the accounting
method for dual-stack
users.
accounting dual-stack
{
merge
|
separate
}
By default, the merge
method is used.

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English