HPE FlexFabric 5940 SERIES User Manual

370
Task Command Remarks
connection to an IPv6
Stelnet server.
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key { dsa |
ecdsa-sha2-nistp256 | ecdsa-sha2-nistp384 | rsa |
{ x509v3-ecdsa-sha2-nistp384 |
x509v3-ecdsa-sha2-nistp256 } pki-domain
domain-name } | prefer-compress zlib |
prefer-ctos-cipher { 3des-cbc | aes128-cbc |
aes128-ctr | aes128-gcm | aes192-ctr | aes256-cbc
| aes256-ctr | aes256-gcm | des-cbc } |
prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 |
sha2-256 | sha2-512 } | prefer-kex
{ dh-group-exchange-sha1 | dh-group1-sha1 |
dh-group14-sha1 | ecdh-sha2-nistp256 |
ecdh-sha2-nistp384 } | prefer-stoc-cipher
{ 3des-cbc | aes128-cbc | aes128-ctr | aes128-gcm
| aes192-ctr | aes256-cbc | aes256-ctr |
aes256-gcm | des-cbc } | prefer-stoc-hmac { md5 |
md
5-96 | sha1 | sha1-96 | sha2-256 | sha2-512 } ] *
[ dscp dscp-value | escape character | { public-key
keyname | server-pki-domain domain-name } |
source { interface interface-type interface-number |
ipv6 ipv6-address } ] *
• In FIPS mode:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key
{ ecdsa-sha2-nistp256 | ecdsa-sha2-nistp384 | rsa
| { x509v3-ecdsa-sha2-nistp384 |
x509v3-ecdsa-sha2-nistp256 } pki-domain
domain-name } | prefer-compress zlib |
prefer-ctos-cipher { aes128-cbc | aes128-ctr |
aes128-gcm | aes192-ctr | aes256-cbc | aes256-ctr
| aes256-gcm } | prefer-ctos-hmac { sha1 | sh
a1-96
| sha2-256 | sha2-512 } | prefer-kex
{ dh-group14-sha1 | ecdh-sha2-nistp256 |
ecdh-sha2-nistp384 } | prefer-stoc-cipher
{ aes128-cbc | aes128-ctr | aes128-gcm |
aes192-ctr | aes256-cbc | aes256-ctr |
aes256-gcm } | prefer-stoc-hmac { sha1 | sha1-96 |
sha2-256 | sha2-512 } ] * [ escape character |
{ public-key keyname | server-pki-domain
domain-name } | source { interface interface-type
interface-number | ipv6 ipv6-address } ] *
Establishing a connection to an Stelnet server based on Suite
B
Task Command Remarks
Establish a
connection to an
Stelnet server based
on Suite B.
• Establish a connection to an IPv4 Stelnet server
based on Suite B:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] suite-b [ 128-bit | 192-bit ]
pki-domain domain-name [ server-pki-domain
domain-name ] [ prefer-compress zlib ] [ dscp
dscp-value | escape character | source
{ interface interface-type interface-number | ip
ip-address } ] *
• Establish a connection to an IPv6 Stelnet server
based on Suite B:
Available in user view.
The client cannot establish
connections to both IPv4
and IPv6 Stelnet servers.

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English