Huawei AR1200 Series - Accessing Another Device

......++++++++
Step 2 Configure VTY user interfaces on the SSH server.
[SSH Server] user-interface vty 0 4
[SSH Server-ui-vty0-4] authentication-mode aaa
[SSH Server-ui-vty0-4] protocol inbound ssh
[SSH Server-ui-vty0-4] quit
Step 3 Configure the SSH user name and password on the SSH server.
[SSH Server] aaa
[SSH Server-aaa] local-user client001 password cipher huawei
[SSH Server-aaa] local-user client001 privilege level 3
[SSH Server-aaa] local-user client001 service-type ssh
[SSH Server-aaa] local-user client001 ftp-directory flash:
[SSH Server-aaa] quit
Step 4 Enable SFTP.
[SSH Server] sftp server enable
Step 5 Verify the configurations.
# Access the SFTP server by using the OpenSSH software.
Figure 6-7 Accessing Interface
----End
Configuration Files
l Configuration file of the SSH server
#
sysname SSH Server
#
aaa
local-user client001 password cipher N`C55QK<`=/Q=^Q`MAF4<1!!
local-user client001 privilege level 3
local-user client001 service-type ssh
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 6 Managing the File System
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
131