NOTE
If the size of the system file in the current directory on the router is different from that on the
PC, an error may occur during file transfer. Upload the system file again.
l Uploading a system file to the AR1200 using the AR1200 as the FTP client and the PC
as the FTP server
1. Run an FTP server program on the PC. This procedure uses WFTPD32 as an example,
as shown in Figure 9-3.
Figure 9-3 Running an FTP server program on the PC
2. Choose Security > Users/rights to configure a user name, password, and FTP
working directory on the PC, as shown in Figure 9-4.
Click New User to set the user name and password. Here, the user name is AR and
the password is 123456. Specify the FTP working directory on the PC in the Home
Directory text box, for example, D:\ftp. Place the system file to this directory and
click Done to close the dialog box.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 9 Upgrade and Maintenance
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
198
To Next Page
Loading...
