Huawei AR150 series - Backing up Electronic Labels; Checking the Configuration

No. Data
1 Name of the electronic label to be backed up
2 (Optional) Slot number of the electronic label
3 (Optional, applicable to backing up the electronic label to the FTP server) Address
of the FTP server, and user name and password
4 (Optional, applicable to backing up the electronic label to the TFTP server) Address
of the TFTP server
5.3.2 Backing Up Electronic Labels
The AR150/200 can back up electronic labels to the FTP server, TFTP server, flash memory, or
USB disk.
Procedure
l Back up electronic labels to the flash memory, or USB disk
1. Run:
backup elabel filename [ slot-id ]
Electronic labels are backed up to the flash memory, or USB disk.
This command can be run in any view.
l Back up electronic labels to an FTP server.
1. Run:
backup elabel ftp ftp-server-address filename username password [ slot-
id ]
Electronic labels are backed up to an FTP server.
l Back up electronic labels to a TFTP server.
1. Run:
backup elabel tftp tftp-server-address filename [ slot-id ]
Electronic labels are backed up to a TFTP server.
----End
5.3.3 Checking the Configuration
After backing up elabels, you can check whether the operation is successful.
Context
The elabels have been backed up.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 5 Hardware Management
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
93