Huawei AR150 series - Configuring Event Management; Establishing the Configuration Task

I=Description information for locating(Para info, Reason info)
J=RootCause alarm sequence(Only for nonRootCause alarm)
1/Independent/2011-08-22 15:27:38/-/0xff8c2028/hwFanInvalid/Warning/Start/OID
1.3.6.1.4.1.2011.5.25.219.2.6.5 Fan is invalid.(Index=16397, EntityPhysicalIndex
=16397, PhysicalName="FAN Card 0/1", EntityTrapFaultID=139264)
Run the display alarm history command to view historical alarms. For example:
<Huawei> display alarm history
A/B/C/D/E/F/G/H/I/J
A=Sequence, B=RootKindFlag(Independent|RootCause|nonRootCause)
C=Generating time, D=Clearing time
E=ID, F=Name, G=Level, H=State
I=Description information for locating(Para info, Reason info)
J=RootCause alarm sequence(Only for nonRootCause alarm)
1/Independent/2011-08-22 15:27:38/2011-08-22 15:42:51/0xff8c2028/hwFanInvalid/
Warning/End/OID 1.3.6.1.4.1.2011.5.25.219.2.6.5 Fan is invalid.(Index=16397, Ent
ityPhysicalIndex=16397, PhysicalName="FAN Card 0/1", EntityTrapFaultID=139264)
Run the display alarm information [ name alarm-name ] command to view information about
a specified alarm. For example:
<Huawei> display alarm information name hwPatchNeedResetBoardTrap
**********************************
AlarmName: hwPatchNeedResetBoardTrap
AlarmType: Alarm
AlarmLevel: NA
Suppress Period: 3s
CauseAlarmName: NA
Match VB Name: NA
**********************************
Run the display this command in the alarm view to check the period after which a generated
alarm is reported. For example:
<Huawei> system-view
[Huawei] alarm
[Huawei-alarm] display this
[V200R002C00]
#
alarm
suppression alarm-name hwSysSlaveHDError cause-period 10
correlation-analyze enable
mask interface GigabitEthernet0/0/1
#
return
7.4 Configuring Event Management
The configurations of event management include the event type and delayed event reporting.
7.4.1 Establishing the Configuration Task
Before configuring event management, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This will help you complete
the configuration task quickly and accurately.
Applicable Environment
You can set the event reporting delay.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 7 Fault Management
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117