Huawei AR150 series - 3.1 Logging In to the Router Through the Web Network Management System

Context
Classifying and outputting a large amount of information degrades system performance.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center enable
The information center is enabled.
By default, the information center is enabled.
----End
2.4.3 (Optional) Naming an Information Channel
Naming information channels helps clarify what is output by each channel.
Context
Do as follows on the router configured with the information center.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center channel channel-number name channel-name
The information channel specified by the channel-number is named as channel-name.
----End
2.4.4 Outputting Alarms to the Alarm Buffer
By default, alarms are output to the alarm buffer through a default channel. You can configure
alarms to be output through a specific channel.
Context
Do as follows on the router configured with the information center:
Procedure
Step 1 Configure the alarms to be output through the channel.
1. Run:
system-view
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 2 Information Center Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22