Huawei AR150 series - Displaying Memory Usage; Displaying Interface Status; Displaying Electronic Labels

CPU usage configurations are displayed.
----End
1.2.5 Displaying Memory Usage
Use the display memory-usage command to view memory usage statistics and threshold.
Procedure
l Run:
display memory-usage
Memory usage statistics are displayed.
----End
1.2.6 Displaying Interface Status
Use the display interface command to view the running status, basic configurations, and packet
forwarding statistics on an interface.
Context
There are two ways to display interface status:
1. Run the display interface command in any view.
2. Run the display this interface command in an interface view.
Procedure
l Run the following command in any view:
display interface interface-type interface-number
The status of the specified interface is displayed.
l View interface status in a specified interface view:
1. Run the system-view command to enter the system view.
2. Run the interface interface-type interface-number command to enter the interface
view.
3. Run the display this interface command to display interface status.
Using the display this interface command in the interface view is equivalent to using
the display interface interface-type interface-numbercommand in any view.
4. Run the display this command to display interface configurations.
----End
1.2.7 Displaying Electronic Labels
Use the display elabel command to view information about electronic labels, including the board
type, BOM code, description, manufacture date, vendor name, issuing number, Common
Language Equipment Identification (CLEI) code, and sales BOM code.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 1 Displaying the Device Status
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4