Huawei AR150 series - Optional) Naming an Information Channel; Outputting Debugging Information to the Log File

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center enable
The information center is enabled.
By default, the information center is enabled.
----End
2.5.3 (Optional) Naming an Information Channel
Naming information channels helps clarify what is output by each channel.
Context
Do as follows on the router configured with the information center.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center channel channel-number name channel-name
The name of the specified channel is set.
----End
2.5.4 Outputting Debugging Information to the Log File
When a fault occurs on the device, you can analyze the output debugging messages to provide
references for fault location.
Context
Do as follows on the router configured with the information center:
Procedure
Step 1 Configure debugging information to be output through the channel.
1. Run:
system-view
The system view is displayed.
2. Run:
info-center source { module-name | default } channel { channel-number | channel-
name } [ debug { state { off | on } | level severity }
*
]
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 2 Information Center Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30