Huawei AR150 series - Deploying Unconfigured Routers; Establishing the Configuration Task

Option Description
Option 146 Operation information in the following format:
opervalue=OPERATEVALUE;delaytime=DELAYTIME;
l opervalue=0: indicates that no file will be deleted from the file system
when the space is insufficient. opervalue=1: indicates that version
files will be deleted from the file system when the space is insufficient.
By default, no file will be deleted from the file system when the space
is insufficient.
l delaytime: specifies the delay in restarting a device after a
configuration file is downloaded to the device, in seconds. By default,
the delay is 0 seconds.
NOTE
The maximum delay in restarting a device is 1 day. If the configured delay is longer
than 1 day, the actual delay is 1 day.
Option 147
Authentication information. Option 147 is optional. If Option 147 is
required, it must be configured as AutoConfig.
Option 150 IP address of a TFTP server.
NOTE
You can use the following methods to configure an FTP or TFTP server:
l To configure a TFTP server, configure Options 6, 15, and 66 and obtain a TFTP server address from
a DNS server.
l To configure a TFTP server, configure Option 150 and obtain the TFTP server address.
l To configure an FTP server, configure Options 141, 142, and 143 and obtain the TFTP user name,
FTP password, and FTP server address.
6.3 Deploying Unconfigured Routers
This section describes how to deploy unconfigured Routers.
6.3.1 Establishing the Configuration Task
Before deploying routers, familiarize yourself with the applicable environment, complete the
pre-configuration tasks, and obtain the data required for the configuration. This will help you
complete the configuration task quickly and accurately.
Applicable Environment
As shown in Figure 6-2, the physical link between the router and DHCP relay agent functions
properly, and there are reachable routes between the DHCP relay agent and servers. The
intermediate file, version file, and configuration file are stored on the FTP/TFTP server. After
the DHCP server and FTP/TFTP server are configured, routers can be configured by using Auto-
Config.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 6 Auto-Config
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
101