Huawei AR150 series - Enabling Log Output; Establishing the Configuration Task

Table 2-4 describes each field in an alarm message.
Table 2-4 Description of each field of in an alarm message
Field Indication Description
TimeStamp Time to send out the
information
Available formats for the timestamp are as follows:
l boot: The timestamp in this format indicates a
relative time.
l date: The timestamp in this format indicates the
system time. Timestamps in logs, alarms and
debugging information are in this format by
default.
l short-date: Unlike the date format, timestamps
in the short-date format do not indicate the year.
l format-date: The timestamp in this format is
another format of the system time.
l none: indicates that the information does not
contain a timestamp.
There is a space between the timestamp and the
host name.
HostName
Host name By default, the name is Huawei.There is a space
between the sysname and module name.
ModuleName Module name Indicates the name of the module that generates an
alarm.
Severity Severity level Severity of traps.
Brief Brief information Provides brief information of the alarms.
Description Description Provides detailed description of the alarms.
2.3 Enabling Log Output
This section describes how to output logs of a specific module to a log file, console, terminal,
or log host.
2.3.1 Establishing the Configuration Task
Before configuring the log output, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 2 Information Center Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12