The system view is displayed.
2. Run:
traffic policy policy-name
A traffic policy is created and the traffic policy view is displayed.
3. Run:
classifier classifier-name behavior behavior-name
A traffic classifier is bound to a traffic behavior in the traffic policy.
classifier-name specifies the name of a traffic classifier and must be the same as the name
of a traffic classifier in 4.4.3 Configuring Complex Traffic Classification; behavior-
name specifies the name of a traffic behavior and must be the same as the name of a traffic
behavior in 4.4.4 Creating a Local Traffic Behavior.
4. Run:
quit
Quit the traffic policy view.
Step 2 Apply the traffic policy to an interface.
1. Run:
interface interface-type interface-number
The mirrored interface view is displayed.
2. Run:
traffic-policy policy-name inbound
The traffic policy is applied to the flow mirrored interface.
----End
4.4.6 Checking the Configuration
After local flow mirroring is configured, check the observing interface and the configuration of
the traffic classifier, traffic behavior, and traffic policy.
Prerequisites
The configurations of local flow mirroring are complete.
Procedure
l Run the display observe-port command to check the observing interface in local port
mirroring.
l Run the display mirror-port command to check the mirrored interface in local port
mirroring.
l Run the display traffic behavior user-defined [ behavior-name ] command to check the
configuration of the traffic behavior.
l Run the display traffic classifier user-defined [ classifier-name ] command to check the
configuration of the traffic classifier.
l Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ]
command to check the configuration of the traffic policy.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 4 Mirroring Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
66
To Next Page
Loading...
