EasyManua.ls Logo

Huawei AR150 series - 4.1 Going Online Using a Static IP Address

Huawei AR150 series
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Run:
snmp-agent
SNMP agent is enabled.
----End
2.4.9 Checking the Configuration
After configuring the alarm output, you can use related commands to confirm the configuration.
Prerequisites
The configurations of the alarm output function are complete.
Procedure
l Run the display channel [ channel-number | channel-name ] command to check the
configuration of a channel.
l Run the display info-center [ statistics ] command to check the information recorded by
the information center.
l Run the display trapbuffer [ size value ] command to check the information recorded by
the alarm buffer.
----End
Example
Run the display channel command to show channels.
<Huawei> display channel
channel number: 0, channel name: console
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warning Y debugging Y debugging
channel number: 1, channel name: monitor
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warning Y debugging Y debugging
channel number: 2, channel name: loghost
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y informational Y debugging N debugging
channel number: 3, channel name: trapbuffer
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default N informational Y debugging N debugging
channel number: 4, channel name: logbuffer
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warning N debugging N debugging
channel number: 5, channel name: snmpagent
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default N debugging Y debugging N debugging
channel number: 6, channel name: channel6
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y debugging Y debugging N debugging
channel number: 7, channel name: channel7
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y debugging Y debugging N debugging
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 2 Information Center Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27

Table of Contents

Other manuals for Huawei AR150 series

Related product manuals