Huawei AR150 series - Outputting Debugging Information to the Terminal

Step 2 Configure the channel through which debugging information is output to the console.
1. Run:
info-center console channel { channel-number | channel-name }
The channel through which debugging information is output to the console is configured.
2. Run:
quit
Return to the user view.
Step 3 Enable terminal display.
1. Run:
terminal monitor
Terminal display is enabled.
2. Run:
terminal debugging
Displaying debugging information on the terminal is enabled.
----End
2.5.6 Outputting Debugging Information to the Terminal
When logging in to the device through a terminal, output debugging messages to the terminal
for query in real time.
Context
Do as follows on the router configured with the information center:
Procedure
Step 1 Configure debugging information to be output through the channel.
1. Run:
system-view
The system view is displayed.
2. Run:
info-center source { module-name | default } channel { channel-number | channel-
name } [ debug { state { off | on } | level severity }
*
]
Debugging information is added to the information channel.
For the specific modules, the default configurations are as follows:
For the log information, the state is on and the allowed information level is warning.
For the alarm information, the state is on and the allowed information level is
debugging.
For the debugging information, the state is off.
Step 2 Configure the channel through which debugging information is output to the terminal.
1. Run:
info-center monitor channel { channel-number | channel-name }
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 2 Information Center Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32