Huawei AR150 series - Displaying Diagnostic Information; Displaying Health Status

Procedure
Step 1 Run:
display elabel [ slot-id ] [ brief ]
Electronic labels are displayed.
This command can be used in any view. The slot-id parameter can be specified to view label
information about the board in a specified slot.
If the brief parameter is specified, the electronic label of an optical module is not displayed.
----End
1.2.8 Displaying Diagnostic Information
Use the display diagnostic-information command to collect running information of all
modules, including clocks, versions, current configuration file, saved configuration files,
physical and protocol information about an interface, statistics on the transmitted and received
packets, memory usage, and system logs. Use this command for locating faults instead of running
multiple display commands.
Procedure
l Run:
display diagnostic-information
Diagnostic information is displayed.
CAUTION
When this command is being executed, system performance will be degraded, for example,
the CPU usage increases. Therefore, do not use this command when the system is operating
normally.
----End
1.2.9 Displaying Health Status
Use the display health command to view health status information, including CPU usage,
memory usage, power supply status, fan status, and temperature.
Procedure
l Run:
display health
Health status is displayed.
----End
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 1 Displaying the Device Status
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5