Table 2-3 Description of each field in a log message
Field Indication Description
TIMESTAMP Time to send out the
information
Available formats for the timestamp are as follows:
l boot: The timestamp in this format indicates a
relative time.
l date: The timestamp in this format indicates the
system time. Timestamps in logs, alarms and
debugging information are in this format by
default.
l short-date: Unlike the date format, timestamps
in the short-date format do not indicate the year.
l format-date: The timestamp in this format is
another format of the system time.
l none: indicates that the information does not
contain any timestamp.
There is a space between the timestamp and the
host name.
HOSTNAME
Host name By default, the name is Huawei.
%% Huawei logo Indicates that log information is output by a
Huawei device.
dd Version number Identifies the version of the log format.
AAA Module name Indicates the name of the module that outputs
information to the information center.
B Log level Indicates the severity level of a log.
CCC Brief description Describes the information type.
(t) Information type Indicates the user log identifier.
[e] Information counter Indicates the log sequence number.
DDD Log ID A maximum of 1024 logs can be stored in the log
buffer. In the log file buffer, the value of this
parameter depends on the log buffer size.
YYYY Descriptor Indicates detailed information output from each
module to the information center.
Before outputting logs, each module fills in this
field to describe log content.
Format of Alarms
Figure 2-3 shows the format of the output alarms.
Figure 2-3 Format of the output alarms
TimeStamp HostName ModuleName/Severity/Brief:Description
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 2 Information Center Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
To Next Page
Loading...
