NOTE
l When configuring the intermediate file, enter the MAC address and ESN, or either of them. The
configuration file is mandatory, and the version file and patch file are optional. The three files can be
configured in any sequence.
l A MAC address (or an ESN), a system software name, patch file name, and configuration file name
are separated by semicolons. A MAC address is in xxxx-xxxx-xxxx-xxxx or xx-xx-xx-xx format. The
file name is case insensitive and contains only letters, digits, and underscores.
l The system software name and version information must be available in the intermediate file, and
version information in the system software name must be the same as that in the intermediate file.
Version information must be contained in the system software.
Auto-Config Process
Figure 6-1 shows the Auto-Config process.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 6 Auto-Config
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
97
To Next Page
Loading...
