Huawei AR150 series - Page 119

-----------------------------------------------------------------------------
192.168.2.1 192.168.2.254 253 1 252 0 0 0
-----------------------------------------------------------------------------
Five minutes after the router obtains the IP address, run the display autoconfig-status command
to check whether correct version files, patch files, and configuration files have been downloaded
and check the running status of Auto-Config.
<AR150/200> display autoconfig-status
Running: Yes
Can deploy configurations with a USB disk:
No
Stop : No
Reason : --
Suspend: Yes
Reason : The unknown reason cause getting
fil
The status of DHCP phase:
Operation result: Successful
Failed reason : --
The status of setting ACS phase:
URL : --
User name : --
Password : --
Operation result: --
Failed reason : --
The status of getting middle file phase:
File name : --
Operation result: --
Failed reason : --
The status of getting system software phase:
File name : auto_V200R002C00B001.cc
Operation result: Suspend
Failed reason : The unknown reason cause getting file from file server failed
The status of getting patch file phase:
File name : auto_V200R002C00B002.pat
Operation result: --
Failed reason : --
The status of getting configuration file phase:
File name : auto_V200R002C00B002.cfg
Operation result: --
Failed reason : --
The status of activating configuration phase:
Remained time : --
Operation result: --
Failed reason : --
----End
Configuration Files
Configuration file of the DHCP server
#
dhcp enable
#
ip pool auto-config
gateway-list 192.168.2.6
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 6 Auto-Config
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
110