Huawei AR150 series - 2.4 Powering on the Device

Prerequisites
The configurations of the information center function are complete.
Procedure
l Run the display channel [ channel-number | channel-name ] command to check the
configuration of a channel.
l Run the display info-center [ statistics ] command to check the information recorded by
an information center.
l Run the display logbuffer command to view the information recorded by a log buffer.
l Run the display info-center filter-id { id | bymodule-alias modname alias } command to
check whether the ID of a single log is added into the filtering list.
l Run the display info-center filter-id command to check whether IDs of all logs are added
into the filtering list.
----End
Example
Run the display channel [ channel-number | channel-name ] command to check the contents of
information channels.
<Huawei> display channel
channel number: 0, channel name: console
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warning Y debugging Y debugging
channel number: 1, channel name: monitor
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warning Y debugging Y debugging
channel number: 2, channel name: loghost
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y informational Y debugging N debugging
channel number: 3, channel name: trapbuffer
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default N informational Y debugging N debugging
channel number: 4, channel name: logbuffer
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warning N debugging N debugging
channel number: 5, channel name: snmpagent
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default N debugging Y debugging N debugging
channel number: 6, channel name: channel6
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y debugging Y debugging N debugging
channel number: 7, channel name: channel7
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y debugging Y debugging N debugging
channel number: 8, channel name: channel8
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y debugging Y debugging N debugging
channel number: 9, channel name: channel9
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y debugging Y debugging N debugging
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 2 Information Center Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19