Huawei AR150 series

To Next Page

To Previous Page

Configuration Roadmap

The configuration roadmap is as follows:

1. Enable the information center.

2. Configure the contents of the logs to be output.

3. Configure the channel through which logs are output.

4. Configure logs to be output to the FTP server.

Data Preparation

To complete the configuration, you need the following data:

l IP address of each interface

l Information channel number

l Module enabled to output logs

l Severity levels of logs

l Language in which logs are output

l IP address of the FTP server

l User name and password of the FTP server

Procedure

Step 1 Configure the routing protocol to make the router and the FTP server reachable. (The detailed

procedure is not mentioned here.)

Step 2 Configure the user name and password that are used on the FTP server. (The configuration details

are not provided here.)

Step 3 Enable the information center:

<Huawei> system-view

[Huawei] sysname RouterA

[RouterA] info-center enable

Step 4 Configure the logs to be output through the channel.

# Configure the module enabled to output the logs and the severity levels of the logs that are

allowed to be output.

[RouterA] info-center source ip channel channel9 log level warning

Step 5 Configure the channel through which logs are output.

# Configure the channel through which logs are output to the log file.

[RouterA] info-center logfile channel channel9

[RouterA] quit

Step 6 Configure logs to be output to the FTP server.

# Log in to the FTP server.

<RouterA> ftp 10.1.1.1

# Configure logs to be output to the FTP server.

[RouterA-ftp] put log.log

[RouterA-ftp] quit

Huawei AR150&200 Series Enterprise Routers

Configuration Guide - Device Management 2 Information Center Configuration

Issue 02 (2012-03-30) Huawei Proprietary and Confidential

Huawei AR150 series - Page 45