Huawei AR3200 Series - Configuring a Principal VLAN; Configuring Subordinate Vlans

3.7.2 Configuring a Principal VLAN
Context
Perform the following steps on the AR3200 to configure a principal VLAN.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
Step 3 Run:
mux-vlan
The VLAN is configured as a principal VLAN.
The AR3200 supports a maximum of 128 principal VLANs, and each principal VLAN can have
at most 32 subordinate VLANs.
----End
3.7.3 Configuring Subordinate VLANs
Context
Perform the following steps on the AR3200 to configure subordinate VLANs.
Procedure
l Configuring group VLANs
1. Run:
system-view
The system view is displayed.
2. Run:
vlan vlan-id
The principal VLAN view is displayed.
3. Run:
subordinate group vlan-id1 [ to vlan-id2 ]
The group VLANs are configured.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 3 VLAN Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
98