Huawei AR3200 Series - Clearing the Traffic Statistics of a Bridge Group; Clearing the Traffic Statistics on the Bridge-If Interface of a Bridge Group

Context
During routine maintenance, you can run the following commands in any view to monitor the
operation of bridge groups.
Procedure
l Run the display bridge traffic [ bridge bridge-id | interface interface-type interface-
number ] command in any view to check whether the traffic statistics on a bridge group
have been cleared.
l Run the display bridge [ bridge-id ] information command in any view to check
information about a bridge group.
l Run the display interface bridge-if [ bridge-id ] command in any view to check
information about the Bridge-if interface of a specified bridge group, including the protocol
status, interface description, and IP address.
l Run the display mac-address [ mac-address | blackhole | static | dynamic ] [ bridge
bridge-id ] [ verbose ] command in any view to check the static, dynamic, or blackhole
MAC address entry of a specified bridge group.
l Run the display mac-address [ mac-address | interface-type interface-number ] bridge
bridge-id [ verbose ] command or display mac-address { static | dynamic } [ interface-
type interface-number ] bridge bridge-id verbose command in any view to check the static
or dynamic MAC address entry of a specified bridge group and interface.
----End
2.7.2 Clearing the Traffic Statistics of a Bridge Group
This section describes how to clear the current traffic statistics on a bridge group so that you can
collect new statistics to help locate faults.
Context
Before collecting traffic statistics on a bridge group, clear the previous statistics.
CAUTION
The traffic statistics cannot be restored after being cleared.
Procedure
l Run the reset bridge bridge-id statistics command in the user view to clear the traffic
statistics of a bridge group.
----End
2.7.3 Clearing the Traffic Statistics on the Bridge-if Interface of a
Bridge Group
This section describes how to clear the traffic statistics on the Bridge-if interface of a bridge
group to help locate faults in the bridge group.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 2 Transparent Bridging Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
61