Huawei AR3200 Series - Optional) Setting the Mode for Adding an Interface to the Voice VLAN

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
voice-vlan mac-address mac-address mask oui-mask [ description text ]
The OUI of the voice VLAN is set.
By default, no OUI is set.
You can set a maximum of 16 OUIs on the AR3200. When the maximum is reached, new OUIs
cannot be set.
----End
4.3.4 (Optional) Setting the Mode for Adding an Interface to the
Voice VLAN
An interface can be added to the voice VLAN in manual mode or auto mode.
Context
l In auto mode, the system adds an interface connected to a voice device to the voice VLAN
if the source MAC address of packets sent from the voice device matches the OUI. The
interface is automatically deleted if the interface does not receive any voice data packets
from the voice device within the aging time.
l In manual mode, the interface connected to a voice device can forward voice data packets
only after the interface is added to the voice VLAN manually.
Procedure
l Configuring the auto mode
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
Access interfaces cannot be added to the voice VLAN automatically.
3. Run:
voice-vlan mode auto
The mode used to add the interface to the voice VLAN is set to auto mode.
By default, an interface can be added to the voice VLAN automatically.
l Configuring the manual mode
1. Run:
system-view
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 4 Voice VLAN Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
128