Huawei AR3200 Series - Maintaining Transparent Bridging; Monitoring the Operation of Bridge Groups

Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Realtime 18 seconds input rate 0 bits/sec, 0 packets/sec
Realtime 18 seconds output rate 0 bits/sec, 0 packets/sec
Input: 396 packets,0 bytes,
190 unicast,206 broadcast,0 multicast
Output:731 packets,0 bytes,
498 unicast,233 broadcast,0 multicast
Input bandwidth utilization : 0.00%
Output bandwidth utilization : 0.00%
Run the display bridge [ bridge-id ] information command to view information about the
remote bridge group.
<Huawei> display bridge information
Bridge 2 :
Status : Undo Shutdown
Bridging : IP, Others
Routing : IP
MAC learning : Enable
interface :total 2 interface(s) in the bridge
GigabitEthernet1/0/0 : Up
GigabitEthernet21/0/0 : Up
Run the display bridge traffic [ bridge bridge-id | interface interface-type interface-number ]
command to view the traffic statistics of the local bridge group.
<Huawei> display bridge traffic
Bridge 1 :
Input :
54 total, 0 bpdu, 50 single,
0 multi, 4 broadcast,
Output :
52 total, 0 bpdu, 45 single,
0 multi, 7 broadcast,
Bridge 2 :
Input :
234 total, 0 bpdu, 198 single,
0 multi, 36 broadcast,
Output :
234 total, 0 bpdu, 196 single,
0 multi, 38 broadcast,
Run the display bridge traffic [ bridge bridge-id | interface interface-type interface-number ]
command to view the traffic statistics of the remote bridge group.
<Huawei> display bridge traffic bridge 2
Bridge 2 :
Input :
234 total, 0 bpdu, 198 single,
0 multi, 36 broadcast,
Output :
234 total, 0 bpdu, 196 single,
0 multi, 38 broadcast,
2.7 Maintaining Transparent Bridging
This section describes how to clear traffic statistics on a bridge group to help locate faults in the
bridge group.
2.7.1 Monitoring the Operation of Bridge Groups
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 2 Transparent Bridging Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
60