<Huawei> display stp region-configuration digest
Oper Configuration
Format selector :0
Region name :huawei
Revision level :0
Digest :0x5F762D9A46311EFFB7A488A3267FCA9F
8.4 Configuring MSTP Parameters on an Interface
Proper MSTP parameter settings achieve rapid convergence.
8.4.1 Establishing the Configuration Task
Before configuring basic MSTP parameters, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This will help
you complete the configuration task quickly and accurately.
Applicable Environment
On some networks, MSTP parameters will affect the speed of network convergence. Proper
MSTP parameter settings help implement rapid network convergence.
NOTE
The default parameters can also be used to complete MSTP rapid convergence. Therefore, the configuration
procedures and steps in this command task are all optional.
Pre-configuration Tasks
Before configuring MSTP parameters, complete the following task:
l Configuring basic MSTP functions
Data Preparation
To configure MSTP parameters, you need the following data.
No.
Data
1 Network diameter
2 Hello time, forwarding delay time, maximum aging time, and timeout period for
waiting for BPDUs from the upstream (3 x hello time x time factor)
3 Maximum hop count in an MST region
4 Link type of a port
5 Whether the port uses the rapid state transition mechanism
6 Whether the port needs to transition to the RSTP mode
7 Maximum number of sent BPDUs
8 Whether the port needs to be configured as an edge port
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 8 MSTP Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
239
To Next Page
Loading...
