Huawei AR3200 Series - Configuring Local Bridging Integrated with IP Routing

Prerequisites
The configurations for local bridging are complete.
Procedure
l Run the display bridge [ bridge-id ] information command to view information about the
bridge group.
l Run the display bridge traffic [ bridge birdge-id | interface interface-type interface-
number ] command to view the traffic statistics on a specified interface in the bridge group.
----End
Example
Run the display bridge [ bridge-id ] information command to view information about the bridge
group.
<Huawei> display bridge information
Bridge 1 :
Status : Undo Shutdown
Bridging : IP, Others
Routing : -
MAC learning : Enable
interface :total 2 interface(s) in the bridge
GigabitEthernet1/0/0 : Up
Vlanif11 : Up
Bridge 2 :
Status : Undo Shutdown
Bridging : IP, Others
Routing : -
MAC learning : Enable
interface :total 1 interface(s) in the bridge
Vlanif12 : Up
Run the display bridge traffic [ bridge birdge-id | interface interface-typeinterface-number ]
command to view the traffic statistics on a specified interface in the bridge group.
<Huawei> display bridge traffic
Bridge 1 :
Input :
34 total, 0 bpdu, 27 single,
0 multi, 7 broadcast,
Output :
36 total, 0 bpdu, 28 single,
0 multi, 8 broadcast,
Bridge 2 :
Input :
0 total, 0 bpdu, 0 single,
0 multi, 0 broadcast,
Output :
0 total, 0 bpdu, 0 single,
0 multi, 0 broadcast,
2.4 Configuring Local Bridging Integrated with IP Routing
Configuring local bridging integrated with IP routing allows users in the same geographical
location but on different network segments to communicate with each other.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 2 Transparent Bridging Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
39