Huawei AR3200 Series - Configuring a Management VLAN; Establishing the Configuration Task; Configuring Management VLAN Functions

Procedure
Step 1 Run the display mux-vlan command to check information about MUX VLAN.
----End
Example
Run the display mux-vlan command to view the principal VLAN and subordinate VLANs.
<Huawei> display mux-vlan
Principal Subordinate Type Interface
-----------------------------------------------------------------------------
100 - principal
100 120 separate Ethernet2/0/1
100 130 group Ethernet2/0/2
100 140 group Ethernet2/0/3
-----------------------------------------------------------------------------
3.8 Configuring a Management VLAN
This section describes how to configure a management VLAN.
3.8.1 Establishing the Configuration Task
Applicable Environment
To improve device security, only add trunk or hybrid interfaces (not access interfaces) to a
management VLAN.
Users usually log in to and manage the device through the VLANIF interface corresponding to
the management VLAN.
Pre-configuration Tasks
Before configuring a management VLAN, complete the following task:
l Creating a VLAN
Data Preparation
To configure a management VLAN, you need the following data.
No.
Data
1 VLAN ID
3.8.2 Configuring Management VLAN Functions
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 3 VLAN Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100