Huawei AR3200 Series - 1 Link Aggregation Configuration

1 Link Aggregation Configuration
About This Chapter
This chapter describes link aggregation concepts and how to configure link aggregation groups
while also providing configuration examples.
1.1 Introduction to Link Aggregation
This section describes the concept of link aggregation.
1.2 Link Aggregation Supported by the AR3200
This section describes the link aggregation features supported by the AR3200.
1.3 Configuring Link Aggregation in Manual Load Balancing Mode
This section describes how to configure link aggregation in manual load balancing mode.
1.4 Configuring Link Aggregation in Static LACP Mode
This section describes how to configure link aggregation in static LACP mode.
1.5 Maintaining Link Aggregation
This section describes how to clear the statistics of received and sent LACP packets, debug the
link aggregation group, and monitor the running status of the link aggregation group.
1.6 Configuration Examples
This section provides configuration examples of link aggregation in manual load balancing mode
and in static LACP mode.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 1 Link Aggregation Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1