Huawei AR3200 Series - Checking the Configuration

Context
Perform the following steps on the AR3200 to limit MAC address learning.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mac-limit maximum max-number
The maximum number of MAC addresses learned on the VLAN is set.
By default, MAC address learning is not limited.
Step 4 Run:
mac-limit alarm { disable | enable }
The alarm generated when the number of learned MAC addresses reaches the limit is enabled
or disabled.
By default, an alarm is generated when the packets received after the number of learned MAC
addresses reaches the limit.
----End
6.5.4 Checking the Configuration
Procedure
Step 1 Run the display mac-limit [ interface-type interface-number | vlan vlan-id ] command to view
the rule of limiting MAC address learning.
----End
Example
Run the display mac-limit command to check the configuration for limiting MAC address
learning.
<Huawei> display mac-limit
-----------------------------------------------------------------------
PORT VLAN Maximum Action Alarm
-----------------------------------------------------------------------
Eth2/0/2 - 100 discard enable
-----------------------------------------------------------------------
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 6 MAC Address Table Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
167