Huawei AR3200 Series - Page 118

Figure 3-4 Networking diagram of VLAN damping configuration
Router
Eth2/0/0 Eth2/0/1
VLANIF10
10.100.100.100/24
10.100.100.111/24 10.100.100.110/24
VLAN 10
IP
network
Configuration Roadmap
The configuration roadmap is as follows:
1. Create a VLAN.
2. Add interfaces to the VLAN.
3. Create a VLANIF interface and set the IP address of the VLANIF interface.
4. Set the VLAN damping delay.
Data Preparation
To complete the configuration, you need the following data:
l VLAN ID
l Interface number
l Number of the VLANIF interface
l IP address of the VLANIF interface: 10.100.100.100/24
l VLAN damping delay: 20 seconds
Procedure
Step 1 Create a VLAN.
# Create VLAN 10.
<Huawei> system-view
[Huawei] sysname Router
[Router] vlan batch 10
Step 2 Add interfaces to the VLAN.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 3 VLAN Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
107