Huawei AR3200 Series - Page 123

To meet the preceding requirements, the enterprise needs to perform the following
configurations: configure VLAN 2 as a principal VLAN and add Ethernet 2/0/1 to VLAN 2;
configure VLAN 3 as a subordinate group VLAN and add Ethernet 2/0/2 and Ethernet 2/0/3 to
VLAN 3; configure VLAN 4 as a subordinate separate VLAN and add Ethernet 2/0/4 and
Ethernet 2/0/5 to VLAN 4.
Figure 3-6 Network diagram of MUX VLAN
VLAN3 VLAN4
VLAN2
ServerA
HostEHostDHostCHostB
Eth2/0/2
Eth2/0/1
Eth2/0/3
Eth2/0/4
Eth2/0/5
Router
Configuration Roadmap
The configuration roadmap is as follows:
1. Configure the principal VLAN.
2. Configure the group VLAN.
3. Configure the separate VLAN.
4. Add interfaces to the VLANs and enable the MUX VLAN function on the interfaces.
Data Preparation
To complete the configuration, you need the following data:
l Ethernet 2/0/1 belongs to VLAN 2.
l Ethernet 2/0/2 and Ethernet 2/0/3 belong to VLAN 3.
l Ethernet 2/0/4 and Ethernet 2/0/5 belong to VLAN 4.
Procedure
Step 1 Configure the MUX VLAN function.
# Create VLAN 2, VLAN 3, and VLAN 4.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN 3 VLAN Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
112