Huawei E9000 - Page 104

E9000 Chassis, the default information is listed in Table 5-4. The CX910 and CX913 do
not support FCoE gateways or FC switching planes.
l For the CX910, CX911, CX912, and CX913 whose software version is V100R001C10
or V100R001C10SPCxxx at the Support > Intelligent Servers > Blade Servers >
E9000 Chassis, the default information is listed in Table 5-5. The CX910 and CX913 do
not support FCoE gateways or FC switching planes.
l The default information of the CX311, CX312, and CX915 is listed in Table 5-5.
Table 5-4 Default information
User
Name
User Description Default
Passwo
rd
User
Type
User
Status
Login
Method
root A BMC user. Huawei
12#$
Administra
tor
Enabled Remote
or local
login
– A user who logs in to the
Bootrom over a serial port.
No user name is used.
Huawei
12#$
Administra
tor
Enabled Local
login
root A user who logs in to the
Ethernet switching plane.
Huawei
12#$
Administra
tor
Enabled Remote
or local
login
admin A user who logs in to the
FCoE gateway or FC
switching plane. The admin
account must be used for the
first login to the FCoE
gateway or FC switching
plane to perform basic
configuration tasks.
Huawei
12#$
Administra
tor
Enabled Remote
or local
login
Table 5-5 Default information
User
Name
User Description Default
Passwo
rd
User
Type
User
Status
Login
Method
root A BMC user. Huawei
12#$
Administra
tor
Enabled Remote
or local
login
– A user who logs in to the
BIOS Setup menu. No user
name is used.
Huawei
12#$
Administra
tor
Enabled Local
login
E9000 Server
User Guide
5 Configuring the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 94