Figure 6-41 Removing the electrode protection cover
4. Connect the O type terminal of the negative electrode to the NEG(–) wiring terminal of
the DC PSU, and the O type terminal of the positive electrode to the RTN(+) wiring
terminal of the DC PSU. See (1) in Figure 6-42.
Do not reversely install the power cable.
Figure 6-42 Installing a DC power cable
5. Install the electrode protection cover of the DC PSU. See (2) in Figure 6-42.
6. Connect the other end of the power cable to the PDU according to the power cable
connection guidelines.
Step 5 Check the indicator status.
For details, see 2.5.2 AC PSU and 2.5.3 DC PSU.
----End
E9000 Server
User Guide
6 Parts Replacement
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 138
To Next Page
Loading...
