Figure 6-53 Installing a new chassis intelligent display
11. Use a Phillips screwdriver to tighten the screws on both sides of the chassis. See (2) in
Figure 6-53.
12. Turn on the chassis intelligent display and check whether it functions properly.
– If yes, no further action is required.
– If no, go to 13.
13. Upgrade the software of the active and standby MM910s to the latest version. Then
check whether the chassis intelligent display functions properly.
For details about the upgrade, see the E9000 Server V100R001 Upgrade Guide.
– If yes, no further action is required.
– If no, go to 14.
14. Upgrade the software of the chassis intelligent display to version 173D or earlier. Then
check whether the chassis intelligent display functions properly.
For details about the upgrade, see the E9000 Server V100R001 Upgrade Guide.
– If yes, no further action is required.
– If no, go to 15.
15. Upgrade the software of the chassis intelligent display to version 173E or later. Then
check whether the chassis intelligent display functions properly.
For details about the upgrade, see the E9000 Server V100R001 Upgrade Guide.
E9000 Server
User Guide
6 Parts Replacement
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 147
To Next Page
Loading...
