Figure A-25 Moving equipment using a flatbed dolly (2)
Note the following when moving equipment using a flatbed dolly:
l Ensure that the passage is clear and wide and high enough for equipment to pass through.
l Move equipment with at least another person, as shown in Figure A-24 and Figure
A-25.
l Slow down the flatbed dolly before making a turn. When making a turn, pull equipment
to move along the outer side of the passage center line (to increase the radius of the turn),
as shown in Figure A-26.
Figure A-26 Route for moving equipment at a turn
E9000 Server
User Guide
A Appendix
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 176
To Next Page
Loading...
