Figure 3-8 Removing the PSU
2. Horizontally pull out the PSU from the chassis. See (2) in Figure 3-8.
Ensure that an ESD bag holds only one PSU.
3. Place the removed PSU into an ESD bag.
4. Repeat 1 to 3 to remove other PSUs.
Step 6 Remove fan modules.
1. Hold down the latch on the inner side of the handle. See (1) in Figure 3-9.
Figure 3-9 Removing a fan module
E9000 Server
User Guide
3 Installing the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 53
To Next Page
Loading...
