Table 1-1794 Description of STAT indicator states
The AE 905S module is operating properly.
The AE 905S module has experienced a hardware
fault or is overheated.
Blinking green once every second
No connection has been established on the GE
interface.
Blinking red every second
The GPS frequency or time is out of lock.
The AE 905S module is powered off or not
operating.
The AE 905S module meets industrial-grade requirements. Table 1-1795 lists its interface
specifications.
Table 1-1795 AE 905S module interface specifications
An AE 905S module uses the SMA interface to
receive GPS satellite signals.
An AE 905S module uses the GE interface to
provide synchronous Ethernet and 1588v2 for
NE40E.
Installation
To meet heat dissipation requirements, leave interfaces around the AE 905S module empty. A
maximum of two AE 905Smodules can be installed on a device.
Figure 1-137 illustrates connections between the AE 905S module, surge protector, and
antenna.
To Next Page
Loading...
