Huawei NE40E - Page 254

NE40E
Hardware Description
1 Hardware Description
Issue 01 (2018-05-03)
240
Table 1-178 Management interfaces
Interface
Name
Interfac
e Type
Connec
tor
Type
Description
Cable
FSP0,
FSP1
Serial
interface
RJ45
Reserved. It
functions as an
interface for
fast chassis
switchovers.
-
GE/10GE
GE/10GE
SFP+/S
FP
Reserved
cascading
interface.
-
MGMT-E
TH
Ethernet
interface
(10M/100
M/1000
M
Base-TX
autonegot
iation)
RJ45
It connects to
an NMS and
can work in
half-duplex or
full-duplex
mode.
Super category 5 shielded twisted
pair
Console
RS-232
serial
interface
RJ45
It connects to
the console for
on-site system
configuration.
Baud rate: 9600
bit/s (default
value), which is
configurable.
8-core shielded cable
AUX
RS-232
serial
interface
RJ45
It connects to
the modem for
remote
mainteN/Ance
by means of
dial-up. Baud
rate: 9600 bit/s
(default value),
which is
configurable.
Currently the
device cannot
be maN/Aged
through the
AUX interface.
The AUX
interface is
reserved for
further
expansion.
8-core shielded cable
CLK/TOD
0,
ExterN/A
l
RJ45
Used to input
or output
120-ohm clock cable