Huawei OceanStor CloudStor CSE Administrator's Guide

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
12 Troubleshooting
Issue 02 (2014-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123
Figure 12-1 Diagnostics model
Figure 12-1 shows the diagnostics of three modules: audio module, video module, and
network transception module.
Audio signals are transmitted in the following signal path:

Local microphone → 1 → 5 → Communication network → 6 → 7 → Remote speaker

Local speaker ← 2 ← 5 ← Communication network ← 6 ← 8 ← Remote microphone
Video signals are transmitted in the following signal path:

Local camera → 3 → 5 → Communications network → 6 → 9 → Remote display
device

Local display device ← 4 ← 5 ← Communications network ← 6 ← 10 ← Remote
camera
Sound and Color Bar Tests
Table 12-1 describes sound and color bar tests.
Table 12-1 Sound and color bar tests
Test
Item to Be Tested
Signal Stream
Sound
2 audio output
2 → Speaker
Color bar
4 video output
4 → Display device

To perform a sound test, choose Sound & Color Bar Test > Sound Test. While the test
audio stored on your endpoint plays, check the sound quality.

To perform a color bar test, choose Sound & Color Bar Test > Color Bar Test. While
seven color bars are displayed on the display device, check the color display quality.
Loopback Tests
During a loopback test, your endpoint transmits audio or video data through a channel to
simulate actual working conditions and tests whether the output is satisfactory. You can

Huawei OceanStor CloudStor CSE Specifications

General

Brand	Huawei
Model	OceanStor CloudStor CSE
Category	Conference System
Language	English