Figure 5-43 Installing battery copper bars and power cables (7+7 scenario used as
an example)
(1) Round hole (2) Slotted hole
● For details about how to route negative battery cables at the bottom layer in the 6+6
and 6+0 scenarios, see Figure 5-44.
● For details about how to route negative battery cables at the bottom layer in the 7+7
and 7+0 scenarios, see Figure 5-43.
● For details about how to route negative battery cables at the bottom layer in the 8+8
and 8+0 scenarios, see Figure 5-45.
Figure 5-44 Routing negative battery cables at the bottom layer (6+6 scenario
used as an example)
Figure 5-45 Routing negative battery cables at the bottom layer (8+8 scenario
used as an example)
SmartLi 3.0
User Manual (Short-Term Backup Power) 5 Installation and Cable Connection
Issue 10 (2024-01-31) Copyright © Huawei Digital Power Technologies Co., Ltd. 93
To Next Page
Loading...
