Huawei TE40 Administrator's Guide

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
4 Display Device and Camera
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43
Video
Resolution
Refresh Rate (Hz)
1200)
1920 x 1200
pixels
60
720p

60, if the output mode is VGA

50 or 60, if the output mode is DVI, YPbPr, or HDMI
1080i
50 or 60
1080p

60, if the output mode is VGA

24, 25, 30, 50, or 60, if the output mode is DVI, YPbPr, or HDMI
Procedure
Step 1 Choose Advanced > Settings > Video > Common Settings > Video Output. Set the
common video output parameters described in Table 4-8.
Table 4-8 Common video output parameters
Parameter
Description
Setting
GUI
Specifies the video output port for the
remote controlled UI.
During a conference, you can configure
your endpoint to display video on one
display and the remote controlled UI on
another display by setting this parameter
to a value different from the value of
Main output interface.
The default value is 1
MAIN OUT.
Caption output
Specifies the video output port for
captions.
NOTE
This parameter takes effect only when the
caption type is set to T.140.
The default value is 1
MAIN OUT.
Main output
interface
Specifies the main output port.
Only the main output port supports
combined picture output. For details
about the combined picture function.
The default value is 1
MAIN OUT.
To ensure good video
quality, retain the default
value.
Auxiliary
output port
Specifies the auxiliary output port for
preferentially displaying presentation.
The default value of TE60
is 2 PC OUT.
The default value of TE40
or TE50 is 2 HDMI OUT.
Do not set Main output
interface and Auxiliary
output port to the same

Huawei TE40 Specifications

General

Brand	Huawei
Model	TE40
Category	Conference System
Language	English