HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuring the LDAP Network Address Book
Step 1 Choose Advanced > Settings > Network > Network Address Book > LDAP Server. Set
the LDAP server parameters described in Table 6-4.
Table 6-4 LDAP server parameters
Specifies the LDAP server IP address.
No default value is set for
this parameter.
Specifies the port used to connect to the
LDAP server.
The default value is 389.
Specifies the distinguished name (DN) of
the entry at which a specified search
starts.
No default value is set for
this parameter.
Specifies the type of LDAP server
authentication.
General: Use the user name and
password for authentication.
Secured: Perform authentication,
including authentication on digital
certificates, based on the Secure
Sockets Layer (SSL) protocol. If you
select this value, you must also set
Domain name.
Anonymous: No authentication is
performed. The LDAP server is
accessible to all users.
The default value is
General.
Specifies whether the SSL protocol is
used to encrypt data streams sent to and
received from the LDAP server.
This parameter is not
selected by default.
Specifies the user name and password
used for LDAP server authentication.
Their default values are
both admin.
The value can contain
digits, letters, and special
characters, such as @ # %.
Specifies the domain name used for
LDAP server authentication.
This parameter is mandatory only when
Authentication type is set to Secured.
No default value is set for
this parameter.
Synchronize
automatically
Specifies whether your endpoint regularly
updates the LDAP Address Book entries
in the local address book.
If you select this parameter, you must
also set Automatic update interval and
Local records prevail if duplicates
exist.
This parameter is selected
by default.
To Next Page
Loading...
Need help?
General
