EasyManuals Logo

Huawei UPS5000-A-H Series User Manual

Huawei UPS5000-A-H Series
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
When moving a heavy object, be aware of the workbench, slope, staircase,
and slippery places. When moving a heavy object through a door, ensure that
the door is wide enough to move the object and avoid bumping or injury.
When transferring a heavy object, move your feet instead of twisting your
waist. When lifting and transferring a heavy object, ensure that your feet
point to the target direction of movement.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
Choose sea or roads in good conditions for transportation. Do not transport
batteries by railway or air. Avoid tilt or jolt during transportation.
When transporting a cabinet, ensure that its tilt angle meets the requirements
shown in the gure. The tilt angle α of a cabinet with packaging shall be less
than or equal to 15°. After the cabinet is unpacked, its tilt angle α shall be
less than or equal to 10°.
Working at Heights
Any operations performed 2 meters or higher above the ground must be
supervised properly.
Only trained and qualied personnel are allowed to work at heights.
Do not work at heights when steel pipes are wet or other risky situations
exist. After the preceding conditions no longer exist, the safety owner and
relevant technical personnel need to check the involved equipment. Operators
can begin working only after safety is conrmed.
Set a restricted area and prominent signs for working at heights to warn
irrelevant personnel away.
Set guard rails and warning signs at the edges and openings of the area
involving working at heights to prevent falls.
Do not pile up scaolding, springboards, or other sundries on the ground
under the area involving working at heights. Do not stay or pass under the
area involving working at heights.
Carry operation machines and tools properly to prevent equipment damage or
personal injury caused by falling objects.
Personnel involving working at heights are not allowed to throw objects from
the height to the ground, or vice versa. Objects shall be transported by slings,
hanging baskets, aerial work platforms, or cranes.
UPS5000-A-(30 kVA-120 kVA)
User Manual 1 Safety Information
Issue 17 (2024-02-21) Copyright © Huawei Digital Power Technologies Co., Ltd. 19

Table of Contents

Other manuals for Huawei UPS5000-A-H Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei UPS5000-A-H Series and is the answer not in the manual?

Huawei UPS5000-A-H Series Specifications

General IconGeneral
BrandHuawei
ModelUPS5000-A-H Series
CategoryUPS
LanguageEnglish

Related product manuals