20
microSD Card Slot
T
he microSD card slot on your control head is compatible with a microSD card (separate purchase required) to update software,
add detailed charts to your control head, import/export navigation data, and save sonar recordings and screen snapshots.
Software Updates: For details, see Update Software.
Add Maps: see Chart Overview.
Import/Export Navigation data: See Manage your Navigation Data.
Sonar Recordings and Screen Snapshots: See Manage Screen Snapshots and Recordings.
CAUTION! Before the control head software is updated or restored to system defaults, export your navigation data (see Update
Software).
Insert a microSD Card
1. Remove the microSD card slot cover.
2. Position the microSD card so that the label faces the front of the control head and the card notches face down.
3. Insert the card into the slot until it clicks into place.
4. Replace the slot cover so it is secure.
5. To Remove: Press the card into the slot and then release it. The card will eject. Pull the card carefully from the slot.
NOTE: Do not leave the card slot cover open. The slot cover should always be closed to prevent water damage to the unit.
The Control Head
To Next Page
Loading...
Need help?
General
