42
Sonar (2D)
DISPLAY A SONAR VIEW ON-SCREEN
T
here are a variety of views available to display sonar data. You can customize the view by showing or hiding information (see
C
ustomize the Sonar View), and you can adjust the sonar settings to refine the information displayed on-screen (see Adjust Sonar
D
isplay Settings and Adjust Settings While you Fish). The changes you make are applied to all traditional 2D sonar views.
Display a Sonar View
1. Press and hold the VIEW key.
2. Select Sonar > Sonar View, Sonar Zoom View, or Split Sonar View.
NOTE: The available views are determined by your control head model and the installed transducer. See each related section of
the manual (Views, Down Imaging, Side Imaging, Navigation Overview, etc.) for more information.
Split Sonar View
For more information, see
Compare Sonar Beams.
Sonar Zoom View
For more information, see
Review Sonar History and Zoom In/Zoom Out.
Sonar View
Circular Flasher View
For more information, see
Display the Circular Flasher View On-Screen
Big Digits View
To Next Page
Loading...
Need help?
General
