Humminbird HELIX 7 G2 SERIES User Manual

88
Down Imaging Sonar
NAVIGATION IN DOWN IMAGING VIEWS
T
o mark waypoints and start navigation, the control head must have a GPS Fix from a connected or internal GPS receiver. See
G
etting Started for more information.
Mark a Waypoint
You can mark a waypoint at the boat position or the cursor position. Waypoints are saved to the Waypoint Management dialog box
(see Manage your Navigation Data).
Mark a Waypoint at the Boat Position
1. Press the MARK key.
Mark a Waypoint at the Cursor Position
1. Use the Cursor Control key to move the cursor to a position on the view.
2. Press the MARK key twice.
Press Twice to
Mark a Waypoint
Move the Cursor
Marking a Waypoint at the Cursor Position
cursor
digital
readouts
cursor
cursor depth depth below cursor distance to cursor position bearing to cursor position

Humminbird HELIX 7 G2 SERIES Specifications

General

Power Input	10-20 VDC
Operating Temperature	-15°C to 55°C
Water Rating	IPX7
GPS Chartplotting	Yes
Display Size	7 inches
Resolution	800 x 480 pixels
Sonar	Yes
Sonar Frequencies Supported	83 kHz, 200 kHz
Max Depth	1500 ft
Power Output	500 W RMS
GPS	Internal GPS
Memory Card Slot	microSD
Connectivity	Ethernet