Humminbird HELIX 7 G2 SERIES User Manual

89
Down Imaging Sonar
Navigate to a Position
Use the instructions in this section to start navigation to a position in the view. See Navigation Overview for more information about
these features.
Navigate to the Cursor Position
1. Use the Cursor Control key to move the cursor to a position on the view.
2. Press the GOTO key twice.
When you press the GOTO key, a waypoint will be marked at the cursor position.
Navigate to a Saved Position
If you press the GOTO key, you can choose to start navigation from a list of saved waypoints and routes.
1. Press the GOTO key.
2. Select Nav Data. Press the RIGHT Cursor key.
3. Use the Cursor Control key to select a saved waypoint or route.
4. Press the RIGHT Cursor key to start navigation.
Cancel Navigation
1. Press the MENU key once.
2. Select Cancel Navigation. Press the RIGHT Cursor key.

Humminbird HELIX 7 G2 SERIES Specifications

General

Power Input	10-20 VDC
Operating Temperature	-15°C to 55°C
Water Rating	IPX7
GPS Chartplotting	Yes
Display Size	7 inches
Resolution	800 x 480 pixels
Sonar	Yes
Sonar Frequencies Supported	83 kHz, 200 kHz
Max Depth	1500 ft
Power Output	500 W RMS
GPS	Internal GPS
Memory Card Slot	microSD
Connectivity	Ethernet