v 1.0 — August 2018 Altanium Neo5
Page 94
8.3 Mold Test Results
1. On the Home screen, select
.
The following section describes the fields and buttons on the Mold Test Results screen.
Item Description
Zone Zone number
Name Zone name
Senor Indicates the number of the sensor being used for that zone.
Fuses The fuses test will determine whether the fuse for that zone is operating
correctly. Fuse values are displayed as follows:
• Question Mark = indicates the test did not complete.
• OK = indicates the fuse for the zone passed the test.
• BLOWN = Zone failed the test and the fuse is blown.
To Next Page
Loading...
